Stop paying for wasted electricity - simply plug-in
the EMF BLOKKER and save up to 10% and more per month
on your electricity bill!
Features
Save up to 10% and more on your monthly utility
bill.
300,000 customers are saving money right now!
Worldwide distribution
No Installation required - Just plug-n-save!
Pays for itself in an average of less than one year
30 day money back guarantee
Increases Motor and Appliance Life
UL, CE and RoHS Tested and Listed
Reduces Power Surges
Earth Friendly
What
is the EMF BLOKKER?
The EMF BLOKKER is new, innovative device that
filters the supply voltage while improving the
efficiency and power factor of the electricity
consumed in a home by electrical appliances.
It's purpose is to save wasted electricity in
homes, condominiums and apartments.
The EMF BLOKKER does not consume electrical
energy. You can use it 24 hours a day all year
round without increasing electricity expenses.
The amount of energy that can be saved depends
on factors such as the type of electrical appliances
used (i.e. air conditioning, garbage disposal
unit..), the amount of electrical used and even
the location of the home. Homes near shops,
restaurants and light industries, where voltage
supply is unstable and may fluctuate, will see
higher savings.
In addition to extending the life span of appliance
motors, the EMF BLOKKER also reduces the reactive
power generated by inductive loads. This helps
utility companies by eliminating interference
to the community power supply.
The EMF BLOKKER is a next generation device
has been professionally tested and checked for
compliance with International Safety Standards.
How
Does the EMF BLOKKER Unit Work?
The EMF BLOKKER reduces the amount of power
drawn from the utility by storing (in its capacitors)
otherwise lost electricity (watts) caused by
the inductive motors in your home. (Some examples
of inductive motors are Air Conditioning units,
refrigerators, freezers, washers, dryers, dishwashers,
pool pumps, vacuum cleaners, furnace blower
motors, fans etc.)
The EMF BLOKKER technology supplies that stored
electricity back to the inductive loads of the
house causing the home to require less electricity
from the utility. This causes a decrease in
demand from the utility.
When there is a decrease the demand from the
utility, the meter slows down coinciding with
less use of electricity. When you have already
paid for that electricity, why waste it when
you can store it, and reuse it again. This whole
process is called power factor optimization.
Why
use EMF BLOKKER?
All electrical equipment and appliances become
less efficient over time. As the age, they consume
more power in order to deliver the same service,
hence the higher electricity bills. Since there
are many appliances in every household, each
with different power and current requirements,
this affects the voltage and current consumption.
Unstable supply voltages increase in resistance
due to wire size and poor power supply which
may result in power loss. The EMF BLOKKER is
designed to compensate for those inefficiencies.
Does
the EMF BLOKKER work in any home?
Yes, simply plug the EMF BLOKKER in any power
outlet and start saving money. The unit is specifically
designed to work for 1 phase service.
Can
the EMF BLOKKER negatively impact appliances?
NO. In fact, by reducing the amount of power
consumed by the household appliances, the motors
in those appliances will run about up to 10%
cooler; prolonging their lifespan.
Is
the EMF BLOKKER tested and approved?
Yes! The EMF BLOKKER is UL listed and tested,
also CE certified for Europe and cULus for Canada.
How
much can I expect to save per month by using
the EMF BLOKKER?
That depends on many factors; the size of your
home, the amount of inductive motor load, and
the amount you are paying per kilowatt-hour
for electricity. It's not unusual for users
of the product to see up to 10% and more in
reduced consumption.
How
long will it take for the EMF BLOKKER to pay
for itself?
Generally about 6-12 months although the same
factors above apply; some will see the payback
in 6 months and some in a year or more.
Is
the EMF BLOKKER easy to install?
Unlike older versions of this product, you do
not need a qualified technician or electrician
to install the EMF BLOKKER. Simply plug it into
a wall outlet and turn it on.
How
many units would customers require?
For any normal apartment or house you just need
to install one unit.
How
long will the EMF BLOKKER last?
It has a planned lifespan of up to 10 years.
LISTEN TO AN INFORMATIONAL
CALL ON THE EFFECTS OF
EMF AND HOW THE
EMF BLOKKER HELPS
REDUCE THE EFFECT
